Automatic Decoiler Machine for Metal Sheet Coils Uncoiling for Power Press feeding
Machine Main Feature
1. The control box is equipped with Schneider low-voltage electronic components and Siemens Servo motor, with few faults and long service life
2. It is suitable for wide material thickness range of 0.5-3.0. Save time and reduce production cost.
3. Adopt hydraulic expansion device, automatic control feed, safety, save people.
4. Manual wheel is used for straightening adjustment, which has precious adjustment performance.
5. Simplified maintenance and management, and enhanced the operation safety of operators
6. All rolls are made of solid bearing steel, which are hardened, hard chrome plated, high hardness, strong wear resistance and long service life
7. The machine with the thick board binding machine is in good operation
8. We can design and manufacture products of special specifications according to your requirements.
Machine main specification
| Model |
LF-200B |
LF-300B |
LF-400B |
LF-500B |
LF-600B |
| Material Width(mm) |
200 |
300 |
400 |
500 |
600 |
| Material Thickness(mm) |
0.4-3.5 |
0.4-3.5 |
0.4-3.5 |
0.4-3.5 |
0.4-3.5 |
| Speed reducer |
1/30 |
1/30 |
1/30 |
1/30 |
1/30 |
| Motor(HP) |
2 |
2 |
2 |
3 |
3 |
| Feeding roller |
Φ70*2 Φ 98*2 |
Φ70*2 Φ 98*2 |
Φ70*2 Φ 98*2 |
Φ70*2 Φ 98*2 |
Φ70*2 Φ 98*2 |
| Leveling roller |
Φ55*7 |
Φ55*7 |
Φ55*7 |
Φ55*7 |
Φ55*7 |
| Coil inner diameter(mm) |
450-530 |
450-530 |
450-530 |
450-530 |
450-530 |
| Coil outer diameter(mm) |
1200 |
1200 |
1200 |
1200 |
1200 |
| Material weight(kg) |
500 |
1000 |
2000 |
2000 |
2000 |
STANARD ACCESSORY
Feeding and straightening rolls with a hard chrome-faced
Feeding and discharging device
Material rack with air pressure disc brake device
Roll head flattening device
Technical Parameter of All Kinds of Metal Sheet Material Decoiler
1. 2in1 Decoiler and Leveling Machine
| Model |
HBL-400 |
HBL-500 |
HBL-600 |
HBL-700 |
HBL-800 |
| Material Width |
400 |
500 |
600 |
700 |
800 |
| Thickness of material |
|
(0.3~3.2/0.5~4.5) |
|
| Max Coil Weight(KG) |
2000 |
|
3000(5000) |
5000(8000) |
|
| Coil I.D.(mm) |
|
Ø508 |
|
| Coil O.D.(mm) |
1200 |
|
1200(1500) |
|
| Speed of (Feed) Straightening(m/min) |
|
16 |
|
| Drive Roll |
|
Feed:2 |
|
| Work Roll |
|
Upper 5/down 4 |
|
| Correction Capability |
400*2.3 |
500*1 |
.6 |
600*2.0 |
700*1.6 |
800*1.2 |
|
| Uncoil Expansion Method |
|
Manual/Hydraulic |
|
| Uncoil Motor(HP) |
1.5 |
2.2 |
|
3.0 |
|
| Straightener Motor |
2 |
3 |
|
5 |
|
2. NC Servo Motor Heavy Material Decoiler
| Model |
Material Width
(max/mm)
|
Thickness Standard
type
|
Height of
mould line
|
Feed Speed
(m/mm)
|
Servo Moter
(kw)
|
| NC-200 |
200mm |
0.3-4.5mm |
70-150mm |
20m/min |
AC1.8KW |
| NC-300 |
300mm |
0.3-4.5mm |
70-150mm |
20m/min |
AC1.8KW |
| NC-400 |
400mm |
0.3-4.5mm |
70-170mm |
20m/min |
AC2.9KW |
| NC-500 |
500mm |
0.3-4.5mm |
70-170mm |
20m/min |
AC4.4KW |
| NC-600 |
600mm |
0.3-4.5mm |
70-170mm |
20m/min |
AC4.4KW |
| NC-700 |
700mm |
0.3-4.5mm |
90-190mm |
20m/min |
AC5.5KW |
| NC-800 |
800mm |
0.3-4.5mm |
90-190mm |
20m/min |
AC5.5KW |
3. Normal Single-head Material Decoiler
| Model |
LF-150 |
LF-200 |
LF-300 |
LF-400 |
LF-500 |
LF-600 |
| LF-150A |
LF-200A |
LF-300A |
LF-400A |
LF-500A |
LF-600A |
| Width of Material (mm) |
150 |
200 |
300 |
400 |
500 |
600 |
| Thickness of Material (mm) |
0.35-2.2 |
| 0.35-3.2 |
| Coil I.D.(mm) |
450-530 |
| Coil O.D.(mm) |
1200 |
| Material Weight (Kg) |
500 |
1000 |
2000 |
3000 |
| 500 |
1000 |
2000 |
3000 |
| Max. Speed (m/min) |
15 |
| Motor (HP) |
1 |
2 |
3 |
| 1 |
2 |
3 |
5 |
| Coil Expansion |
Manual |
Product Application
(1) Automatic operation
The rotation of decoiler uncoiler is controlled by automatic loop arm. The loop arm controls variable speed operation, providing smooth stop and start. Variable speed reduced uncoiler.
(2) Safety
Decoiler uncoiler rotation drive system and mandrel expansion power are fully protected. The pendant control allows automatic rotation to be disabled during coil loading.
(3) Electrical requirements
According to customer country requirements
(4) Architecture
The structure consists of steel plates and heavy structural sections. The seam is sealed and welded. Include structural supports as necessary. The expansion and contraction of the mandrel are realized by a connecting rod system including bronze bearings.
(5) Decoiler finish
After manufacturing, uncoiler frame shall be machine cleaned and powder coated before mechanical and electrical assembly.
(6) Coil car options
Can include reels with weights matching the specified uncoiler. The coil car consists of a "V" shaped surface with a central coil in motion. The coiler car includes sufficient vertical travel to contact the lower surface of the mandrel when fully extended. The power take-up car moves along the rail installed in the base of the uncoiler. The hydraulic check valve prevents the coil from falling vertically in case of hydraulic loss.
(7) Installation
Uncoilers and reels can be installed by drilling holes in typical industrial concrete foundations and concrete expansion bolts.
Product Tags:
|
|
Metal Sheet Coils Uncoiling Power Press Feeding Decoiler Machine Images
|
